Dongke High Speed 2006 Mini Micro Notebook 2CM 12V 5V 2*2*0.6 Ventilador Pequeno e Silencioso para Resfriamento

2.0 Main Materials/Components 1 Plastic parts Material: PBT UL94-V0 2 Bearing Hydraulic Bearings Hydraulic Bearings 3 Lead wire 3302-28AWG 4 Enameled Wire 2UEW-F150℃ 5 PCB Board PCB Material: UL 94 - V0 3.0 Electrical Specifications 1 Insulation Resistance Insulation impedance 10M ohm/measurement between bare wire and outer frame, 500VDC/min 10M/between unshackled wire and frame at 500VDC/min 2 Insulation and Voltage Resistance Dielectric 5Ma Max./Measurement between wire and frame, 500VDC/min 5 months Max/wire between the frame and measurement, 500 VDC/min 3 Life expectancy Life expectancy 25000 hours, 25℃ 25000 hours, 25℃ 4 Direction of Operation Rotating Direction Facing the air inlet counterclockwise CounterclockwiseIn the face of air inlet 5 Lock Protection Locked Protect The rated voltage locks for 0.1 hours without burning out the fan Rated voltage locks in 0.1 hours, the fan did not burn out 6 Polarity protection Polarity Protection VCC and GND reverse connection wire does not conduct electricity VCC and GND reverse connect wires without power 7 Magnetic Pole The magnetic poles 4 poles 4 Poles 8 Waterproof Rating Waterproof level 4.0 Environmental Test 1 Operating Temperature/Humidity Range Temperature and humidity range Temperature/Temperature:-10℃ ~ +70℃ Humidity: 35% ~ 85%RH 2 Save Temperature/Humidity Range Storage Temperature Temperature/Temperature:-40℃ ~ +70℃ Humidity: 35% ~ 85%RH 3 Moisture-resistant Sex Humidity Electrical specifications are based on MIL-STD202F Method 103B Humidity: 95%RH Temperature: 402℃ 4 thermal shock Thermal Shock Electrical specifications are based on MIL-STD202F Method 107D Per MIL-STD202F Method 107D, Condition D 5 Insulation stage Shock Insulation UL: Class A UL: A kind of 6 Vibration Resistance Test of Packaging Packing Vibration Test After packaging, XYZ three-direction 1.1G load vibration test for 30 minutes with no serious damage 7 Impact Resistance Test of Packaging Packing Shock Proof Test After bundling, height 17cm cm, edges and corners naturally fall without serious damage After baling, the height is 37 cm, edges and corners on 3 sides and 6 sides dropped without serious damage