Tifgalop K8 Scooter Elétrica 6000W 12 Polegadas 60V 38AH Bateria com Assento Destacável

Equipped with 2 Powerful 3000W Super Motors Delivering 30 Nm of torque within just 2 seconds in the 3-speed setting. The motor, designed with a sine wave structure, allows you to effortlessly control your riding speed across gears 1 to 3, providing a customizable and intuitive riding experience. LG/Samsung 60V38Ah Battery Utilizing the newly developed 18650 battery cells from Samsung SDI, each lithium-ion single cell measures 18mm in diameter and 65mm in length, combining to form a 60V38Ah configuration. Tifgalop scooter incorporates a quick-detachable sealed design achieving an IPX-6 waterproof rating. The battery is removable for charging and holds UL 2271 international certification. ALUMINUM ALLOY FRAME The Tifgalop e-scooter is a marvel of modern design that combines exceptional stability and endurance with a sturdy aluminium alloy frame. It also has a stylish finish. 3-SPEED MULTIFUNCTION LCD COLOR DISPLAY Colour display improves the user experience. It is easy to monitor current information and is both aesthetically beautiful and multipurpose. It offers ease, safety, and a more pleasurable ride. SINGLE / DUAL DRIVE The smooth transition between single and dual-drive modes delivers a unique riding experience. Single-drive mode is economical and energy-efficient, while dual-drive mode offers more power and improved manoeuvrability for conquering challenging terrain. DUAL BRIGHT HEADLIGHTS The safety and visibility provided by the dual bright headlights allow you to navigate your evening route with unflinching clarity. COMFORTABLE SEATING The Tifgalop e-scooter will make every trip enjoyable thanks to its well-thought-out, comfy seats, whether you are using it for daily commuting or just lazing around. TAIL LIGHT SYSTEM Tail lights that are customised can be added to your electric skateboard setup to increase safety and make for a more responsible and pleasurable ride. SECURE WIDE DECK With enough of room to easily adopt different stances, the broad deck gives riders a sturdy platform that improves balance and control. Riding on it is an overall more enjoyable experience. DYISLAND HYDRAULIC DISC BRAKE The Tifgalop e-scooter’s DYISLAND hydraulic disc brakes provide outstanding braking performance, giving you unmatched control and power over braking, transforming every ride into a thrilling and safe adventure Specification: Model: K8 Motor power: 60V6000W Tyre: 12 inch highway tyre Battery: 60V38AH Maximum: speed 50mph Range: 100-110KM Mileage: 65miles Shock Absorption: Triple rod hydraulic shock absorber Maximum load: 250KG Maximum Climbing: 40° Net Weight : 53KG Net Weight: 116LB Packing weight: 58KG Packing weight: 127LB Packing Size: 135.5*32.5*58cm EU Countries Can be delivered within 4-7 Days.You don't have to pay delivery fee. If you encounter any problems when you receive the product, please contact our professional after-sales customer service first. Italy After Sale Point: Weimiao ji Via Ramiro ortz 6/3 65126 pescara IT 3778179737 Before you go to the repair store ,please contact us first. Email: lijuping@gunai.store Whatsapp: +86 17841010701 Common bicycle problems and solutions Q: Error code appears on the meter A: Check the manual to see what kind of fault the error code belongs to, follow the instructions to handle it, and if it still doesn't work, provide error code pictures/videos. Q: Charger doesn't work A: First check whether the charger is green or red to green when charging; if the green light is always on, it may be a problem with the charger/charging port/battery, and if the red to green light indicates that the charger is normal, it may be a meter problem. Q: The meter can't be turned on A: Check whether the meter line/controller line is plugged in tightly, and re-plug it; if it doesn't work, it may be a problem with the meter/main line/controller Q: Pedal assist doesn't work A: Check whether the meter parameters are correct, confirm whether the throttle can work, and whether the sensor line is damaged or loose; if all are correct, replace the sensor Q: Rear wheel shakes A: Check whether the spokes are loose and whether they are installed in place; you can tighten the spokes and reinstall the rear wheel. Q: Motor does not work/has strong noise A: Check if the controller is loose, re-plug the motor cable of the rear wheel; provide a video of the noise for the technician to determine what the sound is. Q: Battery does not work/battery life is insufficient A: Measure the battery voltage after fully charging the battery (provide pictures). If the voltage is abnormal, there may be a problem with the battery/battery cover/circuit board. For battery life issues, customers test the battery life under full charge and provide the VOL when fully charged, the ODO (total mileage) when fully charged, the VOL when the battery is exhausted, and the ODO (total mileage) when the battery is exhausted. Q: Pedals cannot be installed A: Check if the left and right pedals are installed/twisted in reverse order. If so, check if the crank/pedal threads are slipped. If slipped, the crank pedals need to be replaced. Q: Brakes don’t work/are not sensitive/leak oil A: Adjust the brakes first/check if the brake pads are worn, if there is oil on the brake pads or discs, insufficient friction/is the brake line loose/leak oil, then you need to replace the brakes directly Q: There is an abnormal sound from the brakes A: It may be the sound of wiping the disc. Ask the customer to check if the disc is deformed. If it is not deformed, adjusting it can solve the problem. The disc is stuck in the middle of the brake (with a gap), not too close to the left or right side of the brake Q: The riser is loose and has a gap A: Check if the headset is aligned and installed, and adjust the headset; if it doesn’t work, replace a headset Common problems and solutions for scooters Q: The meter cannot be turned on A: First check if the line on the back of the meter is plugged in tightly, and re-plug it; if the meter still cannot be turned on after the operation, send a replacement to the customer Instrument/Check if the instrument fuse is burnt out/Check if the instrument or switch plug pin is broken Q: Motor does not work A: If it is a dual motor, swap the front and rear controllers to see if the non-working motor will work normally; Q: Abnormal noise from the motor A: Check if there is an error code on the screen, and provide a video for the technician to determine if the abnormal noise is normal Q: Headlight flickers or does not work A: Check if the line is loose, and re-plug the interface; the step-down board of the light strip may be burned/check if the light switch is available, if not, replace the switch Q: Steering/taillight does not work A: Re-plug the line, if it does not work, re-issue the accessories Q: Brake failure A: Check if the instrument has an error prompt, if so, the brake power-off switch may be faulty, and the power-off switch needs to be replaced; or check if the brake pads are worn out and the brake line is loose Q: Error code appears on the instrument A: Check the corresponding manual to see what kind of fault the error code belongs to, and operate according to the instructions. If it still does not work, provide error code pictures/videos. Q: The charger does not work A: First check whether the charger is green or red-to-green when charging; if the green light is always on, it may be a problem with the charger/charging port/battery, and if the red-to-green light is normal, it may be a problem with the instrument.