Aspirador de pó portátil sem fio para carro, com alta sucção, ideal para uso doméstico e automotivo.

[Product name]: Handheld car vacuum cleaner [Product color]: black, white [Product material]: ABS [Packaging weight]: Net weight: 0.30KGS Gross weight: 0.560KGS [Packaging size]: 184mm * 160mm * 60mm [Rated voltage]: DC 7.4V [Vacuum degree]: about 5500pa in the car, about 5000pa in the wireless [Rated speed]: 35500rpm [Lithium battery battery capacity]: 2 * 2000mAh [Charging method]: 5V USB boost charging cable [Rated power]: 50W [Noise]: ≤ 84dB [Operating temperature]: -20 ℃~ + 50 ℃ [USB cable length]: about 1m [Product accessories]: straw 1pcs, brush 1pcs, (1 set of swimming ring inflatable suction set) manual 1pcs, USB charging cable 1pcs, host 1pcs [Instructions for use]: 1. Check whether the charging is sufficient. 2. Just turn on the switch. 3. Replace different nozzles according to different usage scenarios 4. This product is a wet and dry vacuum cleaner. When absorbing water, pay attention to opening the front cover in time for drainage 5. The USB display of the rechargeable battery shows that red is normal charging, and green is full. 6. The charging time is about 3-4 hours to be fully charged, and it can be used for about 30 minutes when fully charged. [Precautions]: 1. The filter must be installed when using it 2. Do not expose to direct sunlight, do not use in high temperature and high pressure places 3. Do not wipe the body with gasoline or highly volatile detergents 4. The front case cannot be removed when the motor rotates 5. This product is a vehicle tool and is prohibited from being used by children alone to avoid danger 6. When absorbing moisture, pay attention to the height of water accumulation in the front cover 7. When removing foreign objects in the gap, please put on a duck bill straw 8. Under normal conditions, it can usually be used for half an hour without affecting the car battery 9. After using this product, please turn off the switch, remove the civilian objects from the mesh bag, press the fastening buckle, and then pour out the foreign objects.